1、電蒸汽鍋爐http://www.tsgspipe.cn/供汽前，應進行暖管。暖管的目的主要是使管道、閥門、各附件的溫度緩慢上升，不可驟熱，避免由于管道或閥門因溫差過大，產生應力而造成損壞。
Electric steam boilers for steam before, should be warm tube. The main purpose is to warm the pipe so that the pipe, valves, slowly rising temperature of each attachment, not sudden heat, avoid the pipe or valve is too large due to temperature, stress and damage.

2、電蒸汽鍋爐暖管時，應打開分汽缸疏水器的旁通閥，逐漸開啟蒸汽主閥，使蒸汽預熱母管后再進入分汽缸，進行暖缸。
Electric steam boiler heating pipe, open the sub-cylinder trap bypass valve, gradually open the main valve steam, the steam preheat mother tube and then into sub-cylinder, the cylinder warm up.

3、電蒸汽鍋爐當母管和分汽缸內凝結水排除后，關閉疏水器旁通閥，觀察鍋爐壓力表與分汽缸上壓力表指示壓力是否相等，然后全部打開主汽閥及分汽缸的分支送汽閥向系統供汽。
Electric steam boiler when the inner tube and the sub-cylinder mother condensate is removed, turn off the hydrophobic bypass valves, pressure gauges and pressure gauge on the boiler were observed indicating cylinder pressure points are equal, then the main steam valve fully open branches and sub-cylinder steam delivery steam supply valve to the system.

4、電蒸汽鍋爐http://www.tsgspipe.cn/送汽過程中應觀察水位計水位，注意補水并維持爐內汽壓。
Electric steam boiler steam process should be sent to observe the water level gauge, pay attention to the maintenance of the furnace and steam pressure.